Home Network
Whole-home ethernet wiring plus ceiling-mounted access points — so every device has a fast, reliable connection, and WiFi actually covers every corner of your home, including the backyard and garage.
Free Assessment →All ServicesWhat's Included

A home network is more than the box your internet provider left behind. We design and build the whole thing, the wired backbone, the access points, and the gear that ties it together, so every room, device, and corner of the property gets a fast, steady connection.
Coverage
The goal is simple: full-strength WiFi everywhere you actually use it, the back bedroom, the finished basement, the garage, the backyard. We get there by placing access points where the coverage needs to be and feeding each one with a wired connection, so the signal stays strong at the far edges instead of fading the moment you leave the room with the router. Walk the whole house on one network and your phone hands off from room to room without you ever noticing.
Mesh vs. Wired
Mesh systems are everywhere because they are easy to buy. But every wireless hop between mesh units costs you speed and adds lag, because each unit has to relay traffic to the others over the air. A wired access point does not. It gets full bandwidth straight from the network, so coverage stays fast no matter how far it sits from the router. We hardwire access points wherever it is possible, and fall back to mesh only when running a cable truly is not, and we will tell you honestly which situation you are in.
Finished Homes
Most homes we wire are already finished and lived-in, and that is completely normal. We run cable the way it has always been done in existing homes, through basements, attics, and closets, fishing walls where we can and using clean surface conduit only where we must. You do not need open walls to get a properly wired network. If you do happen to be building or renovating, though, that is the ideal moment, and our smart-home pre-wire page covers wiring while the walls are open.
Common Problems
Why It Matters
A good home network is invisible. You stop rebooting the router. You stop walking to a certain corner of the house to send a message. Work calls hold. Movies start instantly. The kids game without a meltdown, and the doorbell, thermostat, and cameras all simply stay connected. That is the whole point: not a faster gadget, but a home that quietly keeps up with everything you ask of it.
How We Work
FAQ
It depends on what is slow. We do not change the speed of your internet plan, that comes from your provider. What we do is make sure the speed you already pay for actually reaches every room. If your connection is fast at the router but weak everywhere else, that is a network problem, and that is exactly what we fix. If the plan itself is too small for your household, we will tell you honestly.
It depends on scope. A few wired connections to key rooms usually run in the hundreds; a whole-home setup — wiring, ceiling access points, and the router and switch to tie it together — typically lands between $3,500 and $9,500, depending on your home’s size and how the cable has to run. The free assessment gets you a fixed quote before any work begins.
Often, yes. Many Toronto homes have phone lines that were run on network-grade cable — we can frequently turn those into real wired internet jacks without opening a single wall. We check for this during the assessment; when it works, it’s the cheapest wired network you’ll ever get.
Mesh can work in a smaller home or where running cable is impossible. But wired access points are faster, steadier, and do not lose speed the farther they sit from the router. Wherever we can run a cable, that is what we recommend.
Almost always, yes. We run cable through basements, attics, and closets, and use clean surface conduit only where there is no hidden path. Finished, lived-in homes are most of what we do. And if you’re building or renovating, smart home pre-wire is the cleanest path of all.
It depends on the size, layout, and construction. A compact bungalow might need one or two; a large three-storey home several. We work that out during the assessment, and you only pay for what the home actually needs.
For a busy household with a lot of devices, the newer standards genuinely help with speed and congestion. The good news is that upgrading is mostly a matter of swapping the access point, as long as the cable feeding it has the headroom, which is why we wire it right the first time.
Yes. We recommend and install routers, switches, and access points that fit your home and budget, and we work with quality gear rather than locking you into a single brand. We will not sell you more than you need.
A houseful of cameras, plugs, and sensors can overwhelm a basic router. We build a network that handles the load and keep those devices organized so they cannot drag everything else down.
Yes. We can wire your office and gaming setup directly for the most stable connection possible, and set the network up so video calls and gaming stay smooth even when the whole house is busy.
Outdoor and detached spaces are some of the most common dead zones, and some of the easiest wins. We can extend solid coverage to the yard, deck, garage, or workshop with the right access point and a wired run. The same wired runs can power security cameras while we’re at it.
Tell us where it drops, lags, or dies. We will assess your home and map a network that just works, with no pressure and no guesswork.
Free Assessment →Serving Toronto and the GTA — North York, Scarborough, Etobicoke, Vaughan, Markham, Richmond Hill, and Mississauga.
NETRIZER
Commercial Infrastructure
Professional network and smart home solutions for businesses and homeowners across Toronto and the Greater Toronto Area.
© 2026 NetRizer. All rights reserved.
Network, Security & Automation · Toronto & GTA