Structured Cabling

Structured Cabling
Planned. Tested. Documented.

Clean, reliable network cabling for offices, warehouses, retail, and multi-tenant buildings across Toronto and the GTA. We plan the routes before the drywall goes up, run Cat6, Cat6A, and fiber terminated to the TIA-568 standard, test every line, and document the whole job. Done once, done right.

Free Assessment →All Services

What's Included

Plan First. Cable Once.

Structured cabling and network infrastructure in Toronto and the GTA

A clean network starts before the first cable is pulled. We map drops, routes, and rack layout around how your space actually works — then install it to last.

  • Cat6 and Cat6A copper cabling, terminated in-house to the TIA-568 standard
  • Fiber optic cabling pulled and installed — splicing and termination through trusted specialists when a job calls for it
  • Data drops for offices, workstations, access points, cameras, and equipment rooms
  • Patch panel and network rack termination
  • Cable routes planned around your space, not crammed in afterward
  • Every run tested for correct termination and continuity
  • Clear labelling at both ends
  • Coordination with your electrician, GC, or renovation crew
  • As-built documentation delivered at handover
  • Capacity built in for future WiFi, CCTV, and smart-home
Free Assessment →

Common Problems

Problems We
See Every Week.

If any of these match your space, the cabling is usually the root cause — and the part most installers skip past.

Messy unstructured cabling before a NetRizer cleanup in Toronto and the GTA
  • Dead or unstable internet in the rooms that matter most
  • Network closets that look like a bowl of spaghetti
  • Not enough drops — and no clean way to add more
  • Unlabelled cables that turn every fix into a guessing game
  • Access points and cameras stranded with no solid wired connection
  • Renovations closed up with no low-voltage plan, so everything runs on strained WiFi

Why It Matters

The Layer You
Can't Redo.

Cabling is the one layer you can't easily change — it sits behind drywall, above ceilings, inside walls. Get it right and everything on top of it — WiFi, cameras, phones, smart devices — just works.

In-wall and ceiling structured cabling in Toronto and the GTA

Get it wrong and you pay twice: once to install it, and again to chase the problems it causes. We treat the cable as the foundation it is, because everything else depends on it.

How We Work

Five Steps.
No Surprises.

Most installers pull cable and walk away. We work in five clear stages, so you always know what's going in, what it costs, and why.

1. Design & estimate drawings — free. We lay the job out on paper — drop locations, routes, and rack layout — so you see the full scope and an accurate price before you commit. No charge, no obligation.

2. Issued-for-construction (IFC) drawings. Once you approve, we produce the detailed drawings we build from. Nothing gets installed until you've signed off.

3. Installation. We pull and terminate to the approved drawings — clean, to the TIA-568 standard, coordinated with your electrician, GC, or reno crew.

4. Testing. Every run is tested for correct termination and continuity, and labelled at both ends.

5. As-built documentation. You get final drawings that match exactly what was installed — every run labelled and mapped — so the next person to touch your network, including future-you, isn't working blind.

FAQ

Questions,
Answered.

How much does network cabling cost per drop in Toronto?

For most commercial projects in the GTA, a Cat6 drop lands in the $120–$250 range installed — the exact number depends on drop count, pathway conditions, and whether the building is occupied during work. Unit cost falls as volume rises: a 50-drop office prices very differently per drop than a 5-drop retrofit. The same backbone typically carries your CCTV and wireless access points — running them in one mobilization costs less than two visits. Every quote is fixed after a site walkthrough, with full testing and labelled documentation included.

Cat6 or Cat6A — which do I need?

Cat6A handles 10-gigabit speeds over longer runs with better shielding, so we recommend it for new builds and long cable runs. Cat6 is the right, cost-effective choice for standard office and workstation drops. We'll tell you which makes sense for your space — not just upsell the bigger number.

Should cabling be done before the drywall goes up?

Whenever possible, yes. Running cable before drywall is faster and cleaner. Once the walls are closed, every new cable has to be fished through finished spaces — that's slow, manual work, and slow labour costs more. Planning it up front saves you both time and money.

Do you test the cables you install?

Yes. Every run is tested for correct termination and continuity, and labelled at both ends. If a job requires certified test reports for compliance, we'll arrange that on a case-by-case basis.

Can you work with my electrician or contractor?

Yes. We coordinate routes, drop locations, and timing with your electrician, general contractor, or renovation crew so low-voltage and electrical don't collide on site.

What do I actually get when the job's done?

Clean, labelled cabling and as-built documentation you can hand to anyone who works on the network later — including yourself. No mystery cables, no guesswork.

Get a Plan, Not a Guess

We'll review your space or your drawings and map exactly what to wire — at no cost.

Free Assessment →

Serving Toronto and the GTA — North York, Scarborough, Etobicoke, Vaughan, Markham, Richmond Hill, and Mississauga.

Commercial Infrastructure

Professional network and smart home solutions for businesses and homeowners across Toronto and the Greater Toronto Area.

Contact

(647) 558-6646

info@netrizer.com

North York, Toronto, ON

© 2026 NetRizer. All rights reserved.

Network, Security & Automation · Toronto & GTA